![]() ![]() If you want to avoid potential connection problems, it's best to set a static IP address on the device so the configuration never changes. Usually, a computer receives a dynamic IP address from the DHCP server (the router), indicating that it can change anytime. ![]() In addition, you will also need to determine the public IP address of the remote computer to connect from outside the network.Īlthough setting up a static IP address configuration is not a requirement, it's recommended. You must configure the router to set up a remote session over the internet. If you have a third-party security solution, you may have to configure the firewall rules manually. Go to Advanced settings in the Remote Desktop pane and then uncheck the "Require computers to use Network Level Authentication to connect" option.Once you complete the steps, the protocol will enable, and the system will open the required firewall rules to allow connections to the computer. If your RDP client throws an error when connecting to the remote PC (for example: ERROR: CredSSP: Initialize failed, do you have correct kerberos tgt initialized?), try turning off Network Level Authentication. This way you can access your Microsoft Windows desktop from any operating system or any device using an RDP Client. Then, log in using your Windows username and password. You can now connect to your Windows 10 PC from a remote computer using a Remote Desktop Client.įrom the RDP Client, use the IP Address of your Windows 10 PC to connect. Click Change settings and then check the two boxes next to Remote Desktop (for private and public networks).From the Firewall, Click on the Allow an app or feature through Windows Defender Firewall link in the left pane.Open Windows Firewall (Start button > Windows System > Control Panel) - From the Control Panel Go to Systems and Security > Windows Defender Firewall.( enabled by default in Windows, so this step is not required anymore). We now need to allow remote desktop connections to our Windows 10 PC from the Windows Firewall. Enable Remote Desktop Connection From Windows Firewall On the remote desktop page, Turn on the toggle switch as shown in the following screenshot.Īgain, the firewall does not need to be configured. ![]() On the left panel, choose System and scroll down to find the Remote Desktop link. If you are on Windows 11, right-click the start button and select Settings from the menu. You don't have to configure the Firewall manually anymore. Allow Remote Connections - Under the Remote Desktop section, Turn "Enable Remote Desktop" on, and then choose Confirm. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |